CMM Programmer/ Operator

The CMM Programmer/ Operator is responsible to program and operate the coordinate measuring machine (CMM) to perform layout inspections of production parts.

ESSENTIAL DUTIES AND RESPONSIBILITIES:
This list of duties and responsibilities is not all-inclusive and may be expanded from time to time to include other duties and responsibilities, as management may deem necessary.

• Acts as a safety leader and puts safety first in all responsibilities. Complies with all safety and health guidelines, quality standard practices/procedures, and housekeeping standards.
•  Responsible Program the CMM using Zeiss Calypso and PCDMIS programming language, with either a part drawing or part CAD model for dimensional information.
• To provide accurate, detailed reports of inspections on samples of castings and machined parts, using Calypso, PCDMIS, and MS Excel Templates.
• To perform calibrations on measurement and test equipment. To perform required statistical process (SPC) Measurements and update SPC records.
• To calibrate simple gages (E.g., gage pins, calipers, micrometers, height gages, thread gages, pH meters, Zhan cups) used traceable standards.
• To request quotes and submit purchase requests for external services to calibrate gages and instruments outside internal capability to calibrate (e.g., temperature gages, pressure gages, thermocouples, TAM panels, Geiger counters, gage standards, thread gages, torque wrenches, etc.)
• Preparation Use Gage tracker software to record the calibration status of all gages. Notify employees when gages in their possession are due for calibration. To perform any inspections required by supervision.

QUALIFICATION REQUIREMENTS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EDUCATION AND/OR EXPERIENCE:

• High School or equivalent on-the-job training.
• Certified Calibration Technician or Certified Quality Technician Certificate Preferred.
• Five years of inspection or layout experience, one year of quality inspection or calibration experience.